Details
BUY NJM13700M https://www.utsource.net/itm/p/12606427.html
| Parameter | Specifications |
|---|---|
| Product Name | NJM13700M Dual Operational Amplifier |
| Supply Voltage | 卤2.5V to 卤18V (Single supply: 5V to 36V) |
| Supply Current | 1.9mA per amplifier |
| Input Offset Voltage | 1mV max (typical @ 25掳C) |
| Slew Rate | 1.0V/渭s |
| Bandwidth | 1MHz (unity gain) |
| Output Current | 20mA (short-circuit protection included) |
| Operating Temperature | -40掳C to +85掳C |
| Package Type | SOIC-8, PDIP-8 |
Instructions for Use
Power Supply Connection:
- Connect the power supply pins correctly to avoid damage. The positive supply connects to pin 8 and the negative supply to pin 4.
Signal Input:
- Connect the input signal to the non-inverting (+) and inverting (-) inputs of the operational amplifiers located on pins 3 and 2 for the first op-amp, and pins 6 and 5 for the second op-amp.
Feedback Loop:
- For stable operation, ensure a feedback loop is established. This can be done by connecting a resistor from the output pin back to the inverting input.
Output Connection:
- Output signals are available on pins 1 and 7 for the respective op-amps. Ensure that the load connected to these outputs does not exceed the maximum output current rating.
Decoupling Capacitors:
- Place decoupling capacitors close to the power supply pins (e.g., 0.1渭F ceramic capacitors) to reduce noise and stabilize the power supply.
Temperature Considerations:
- Operate within the specified temperature range to ensure reliable performance. Avoid exposing the device to temperatures outside the -40掳C to +85掳C range.
Storage and Handling:
- Store in a dry environment and handle with care to prevent electrostatic discharge (ESD) damage. Use appropriate ESD protection measures during handling.
View more about NJM13700M on main site