Details

---

BUY MC1458CP2 https://www.utsource.net/itm/p/12606443.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5	-	16	V
Supply Current	ICC	Quiescent, per op-amp	-	0.7	-	mA
Input Voltage Range	VI	Operating	0	-	VCC - 1.5	V
Output Voltage Swing	VO	No load	0	-	VCC - 1.5	V
Output Short-Circuit Protection	-	Continuous	-	-	-	-
Slew Rate	SR	-	-	0.5	-	V/渭s
Common-Mode Rejection Ratio	CMRR	-	-	80	-	dB
Power Supply Rejection Ratio	PSRR	-	-	80	-	dB
Bandwidth	BW	Unity Gain	-	1.1	-	MHz
Gain-Bandwidth Product	GBW	-	-	1.1	-	MHz
Input Offset Voltage	VOS	Initial	-	2	-	mV
Input Bias Current	IB	-	-	100	-	nA
Input Offset Current	IIO	Initial	-	20	-	nA
Differential Input Voltage	VID	Maximum	-	-	30	V

Instructions for Using MC1458CP2:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 16V.
   • Connect the positive supply to V_CC and the negative supply to ground (GND).

2. Input Signals:

   • The input signals should be within the range of 0V to V_CC - 1.5V.
   • Avoid exceeding the maximum differential input voltage of 30V.

3. Output Configuration:

   • The output can swing from 0V to V_CC - 1.5V under no-load conditions.
   • For optimal performance, ensure the load impedance is appropriate for the output current capability.

4. Protection:

   • The device has built-in short-circuit protection, but avoid prolonged short circuits to prevent damage.

5. Biasing and Offset:

   • The input bias current is typically 100nA, and the input offset voltage is typically 2mV.
   • Use external components like biasing resistors and capacitors to minimize offset and bias effects.

6. Stability and Performance:

   • The gain-bandwidth product is 1.1MHz, suitable for a wide range of applications.
   • For high-frequency applications, consider the slew rate of 0.5V/渭s.

7. Common-Mode and Power Supply Rejection:

   • The common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) are both 80dB, providing good noise immunity.

8. Operating Temperature:

   • The device is designed to operate within the commercial temperature range of 0掳C to 70掳C.

9. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure reliable connections.

By following these parameters and instructions, you can effectively use the MC1458CP2 operational amplifier in your circuit designs.

(For reference only)