Details

---

BUY AY-3-8760 https://www.utsource.net/itm/p/12606451.html

Parameter	Description
Chip Name	AY-3-8760
Function	Video Game Chip, used in various 1970s and 1980s video game consoles
Manufacturer	General Instrument (GI)
Pin Count	24-pin DIP (Dual Inline Package)
Operating Voltage	5V DC
Operating Temperature	-40掳C to +85掳C
Clock Frequency	3.58 MHz (NTSC), 3.54 MHz (PAL)
Power Consumption	Approximately 100 mW at 5V
Output Signals	Composite video signal, audio signal
Features	Built-in ball and paddle generators, collision detection, on-screen scoring

Instructions for Use

1. Power Supply:

   • Connect the Vcc pin (pin 16) to a 5V DC power supply.
   • Connect the GND pin (pin 8) to ground.

2. Clock Input:

   • Connect the clock input (pin 17) to a 3.58 MHz (NTSC) or 3.54 MHz (PAL) oscillator.

3. Control Inputs:

   • Connect the control inputs (pins 1, 2, 3, 4, 5, 6, 7) to the appropriate control signals for game selection, player movement, and other game functions.

4. Video Output:

   • Connect the composite video output (pin 18) to a video monitor or TV set.
   • The video output is a composite signal that includes both the video and sync information.

5. Audio Output:

   • Connect the audio output (pin 19) to an audio amplifier or speaker.
   • The audio output is a simple square wave that can be modulated by the game logic.

6. Reset Input:

   • Connect the reset input (pin 20) to a reset signal to initialize the chip at the start of a new game.

7. Test Mode:

   • Use the test mode input (pin 21) to perform diagnostic tests on the chip.

8. Ground Connections:

   • Ensure all ground connections (pins 8, 9, 10, 11, 12, 13, 14, 15) are properly connected to ground for stable operation.

9. Signal Levels:

   • All digital inputs and outputs are TTL compatible (0V for low, 5V for high).

10. Heat Dissipation:

    • While the chip operates at a relatively low power, ensure adequate ventilation or heat sinking if operating in a high-temperature environment.

Notes:

• The AY-3-8760 is designed to work with a variety of external components, including resistors, capacitors, and oscillators, which are necessary for proper operation.
• Refer to the specific application notes and datasheets provided by General Instrument for detailed circuit diagrams and additional configuration options.

(For reference only)