Details

---

BUY MP4209 https://www.utsource.net/itm/p/12606454.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Output Current	IOUT	-	150	-	mA	Continuous output current
Quiescent Current	IQ	-	10	-	渭A	Typical quiescent current
Dropout Voltage	VDROPOUT	-	250	-	mV	Typical dropout voltage at 150 mA
Load Regulation	-	-	1	-	%	Load regulation from 0 to 150 mA
Line Regulation	-	-	0.1	-	%/V	Line regulation over input range
PSRR (1 kHz)	-	-	60	-	dB	Power supply rejection ratio
Operating Temp.	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temp.	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal of the power source.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Connection:

   • Connect the output voltage (VOUT) to the load or circuit that requires power.
   • The output voltage is fixed at 3.3V.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the system.

4. Capacitors:

   • Place a 1渭F ceramic capacitor between VIN and GND as close to the MP4209 as possible to ensure stability.
   • Place a 1渭F ceramic capacitor between VOUT and GND to filter the output and maintain stability.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if the device is operating near its maximum output current.
   • The device can operate up to 85掳C, but prolonged operation at high temperatures may reduce reliability.

6. Protection:

   • The MP4209 includes internal short-circuit and thermal shutdown protection.
   • Avoid subjecting the device to excessive voltage or current beyond the specified limits.

7. Layout:

   • Keep the PCB layout compact to minimize parasitic inductance and capacitance.
   • Use wide traces for power and ground connections to reduce resistance and improve performance.

8. Storage:

   • Store the device in a dry environment within the temperature range of -65掳C to 150掳C.

By following these instructions, you can ensure optimal performance and reliability of the MP4209 in your application.

(For reference only)