Details

---

BUY 5304 https://www.utsource.net/itm/p/12606455.html

Parameter	Description
Part Number	5304
Type	Diode
Package	SOD-123
Forward Voltage (Vf)	0.7V at 1A (Max)
Reverse Voltage (Vr)	50V (Max)
Average Rectified Current (Io)	1A (Max)
Peak Reverse Current (Irm)	100mA (Max) at 25掳C
Power Dissipation (Pd)	1W (Max) at 25掳C
Operating Temperature Range	-65掳C to +150掳C
Storage Temperature Range	-65掳C to +150掳C
Junction-to-Ambient Thermal Resistance (R胃JA)	150掳C/W
Lead Material	Pb-Free (RoHS Compliant)
Moisture Sensitivity Level (MSL)	Level 1 (Unlimited)

Instructions for Use

1. Handling Precautions:

   • Handle the 5304 diode with care to avoid damage to the leads or body.
   • Use proper ESD protection to prevent electrostatic discharge damage.

2. Mounting:

   • Ensure that the diode is mounted on a PCB with adequate thermal management if high power dissipation is expected.
   • Use a heat sink if the diode will be operating near its maximum power dissipation limit.

3. Soldering:

   • Solder the diode using a temperature-controlled soldering iron set to no more than 300掳C.
   • Do not exceed a soldering time of 10 seconds per lead.
   • Allow the diode to cool naturally after soldering to avoid thermal shock.

4. Electrical Connections:

   • Connect the anode (A) and cathode (K) leads correctly to the circuit.
   • Ensure that the reverse voltage does not exceed 50V to prevent breakdown.
   • Keep the forward current within the rated average rectified current (1A) to avoid overheating.

5. Testing:

   • Test the diode using a multimeter set to the diode test mode to ensure it is functioning correctly.
   • Measure the forward voltage drop across the diode to confirm it is within the specified range.

6. Storage:

   • Store the diode in a dry, cool place away from direct sunlight.
   • Follow the moisture sensitivity level (MSL) guidelines to prevent damage due to moisture exposure.

7. Compliance:

   • The 5304 diode is RoHS compliant and lead-free.
   • Ensure that the diode meets all relevant safety and regulatory standards for your application.

(For reference only)