Details

---

BUY 65F6110.. https://www.utsource.net/itm/p/12606461.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	Vcc	2.7	5.5	5.5	V
Operating Temperature	Toper	-40		85	掳C
Storage Temperature	Tstg	-65		150	掳C
Input Leakage Current	IIL		1	10	渭A	@ Vcc = 5V, Ta = 25掳C
Output Leakage Current	IIH		1	10	渭A	@ Vcc = 5V, Ta = 25掳C
Input High Voltage Level	VIH	3.5		5.5	V	@ Vcc = 5V, Ta = 25掳C
Input Low Voltage Level	VIL	0		1.5	V	@ Vcc = 5V, Ta = 25掳C
Output High Voltage Level	VOH	3.5		5.5	V	@ Vcc = 5V, Ta = 25掳C, IO = -100渭A
Output Low Voltage Level	VOL	0		0.4	V	@ Vcc = 5V, Ta = 25掳C, IO = 100渭A
Propagation Delay Time	tpd		10	30	ns	@ Vcc = 5V, Ta = 25掳C, Voh = 3.5V, Vol = 0.4V
Power Consumption	ICC		10	20	渭A	@ Vcc = 5V, Ta = 25掳C

Instructions:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V for proper operation.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Operating Temperature (Toper):

   • The device operates reliably between -40掳C and 85掳C.
   • Ensure the ambient temperature remains within this range to avoid performance issues.

3. Storage Temperature (Tstg):

   • Store the device in an environment where the temperature ranges from -65掳C to 150掳C to prevent degradation.

4. Input Leakage Current (IIL) and Output Leakage Current (IIH):

   • These currents should be kept below 10渭A to ensure stable operation.
   • Use appropriate pull-up or pull-down resistors if necessary to manage these currents.

5. Input Voltage Levels (VIH, VIL):

   • Ensure input signals are within the specified high (3.5V to 5.5V) and low (0V to 1.5V) voltage levels for reliable detection.

6. Output Voltage Levels (VOH, VOL):

   • The output high level should be at least 3.5V and the output low level should not exceed 0.4V to ensure compatibility with other digital circuits.

7. Propagation Delay Time (tpd):

   • The propagation delay time is typically 10ns but can vary up to 30ns.
   • Account for this delay in your timing calculations to avoid data corruption.

8. Power Consumption (ICC):

   • The typical power consumption is 10渭A, with a maximum of 20渭A.
   • Ensure the power supply can handle this current draw without significant voltage drop.

(For reference only)