Details

---

BUY UCS1903 https://www.utsource.net/itm/p/12606462.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		2.7		5.5	V
Operating Temperature		Storage	-40		85	掳C
Output Current per Channel	Iout	Continuous	0	20		mA
Peak Output Current		Short Pulse		50		mA
PWM Frequency	fPWM	Typical		300	2000	kHz
Duty Cycle Range	D		0		100	%
Power Dissipation	Pd	Continuous		600		mW
Rise Time	tr	20% to 80%		200		ns
Fall Time	tf	80% to 20%		200		ns
Propagation Delay	tpd	Input to Output		200		ns

Instructions for Using the UCS1903

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Temperature Considerations:

   • The operating temperature range is from -40掳C to 85掳C.
   • Store the device in the same temperature range to prevent damage.

3. Output Current:

   • The continuous output current per channel should not exceed 20mA.
   • For short pulses, the peak output current can go up to 50mA.

4. PWM Operation:

   • The typical PWM frequency range is between 300kHz and 2000kHz.
   • Adjust the duty cycle between 0% and 100% as needed for your application.

5. Power Dissipation:

   • The maximum continuous power dissipation is 600mW.
   • Ensure adequate heat dissipation if operating near this limit.

6. Signal Timing:

   • The rise time (tr) and fall time (tf) are typically around 200ns.
   • The propagation delay (tpd) from input to output is also around 200ns.

7. Handling and Storage:

   • Handle the device with care to avoid static discharge.
   • Store in a dry, cool place within the specified temperature range.

8. Application Notes:

   • The UCS1903 is suitable for driving LEDs, small motors, and other low-power devices.
   • Ensure all connections are secure and correctly wired to prevent damage or malfunction.

By following these parameters and instructions, you can ensure optimal performance and longevity of the UCS1903.

(For reference only)