Details

---

BUY HD74LS76AP https://www.utsource.net/itm/p/12606464.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	4.75	-	5.25	V
Input Low Voltage	VIL	0.0	-	0.8	V
Input High Voltage	VIH	2.0	-	VCC	V
Output Low Voltage	VOL	0.0	0.4	0.5	V	IOL = 16 mA
Output High Voltage	VOH	2.4	2.7	VCC - 0.5	V	IOH = -0.4 mA
Propagation Delay Time	tpd	-	22	34	ns	VCC = 5V, TA = 25掳C
Power Dissipation	PD	-	-	100	mW
Operating Temperature	TA	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • For a logic low input, ensure the voltage is between 0V and 0.8V.
   • For a logic high input, ensure the voltage is between 2.0V and V_CC.

3. Output Signals:

   • When the output is low, it should be between 0V and 0.5V.
   • When the output is high, it should be between 2.4V and V_CC - 0.5V.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 22ns at V_CC = 5V and T_A = 25掳C. Ensure your circuit design accounts for this delay.

5. Power Dissipation:

   • The maximum power dissipation is 100mW. Ensure adequate heat dissipation if operating near this limit.

6. Temperature Range:

   • The device is designed to operate within a temperature range of -40掳C to 85掳C.
   • Store the device in a temperature range of -65掳C to 150掳C.

7. Handling:

   • Handle the device with care to avoid damage from static electricity.
   • Follow proper soldering techniques to prevent thermal shock.

8. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and function of each pin.

9. Testing:

   • Before integrating the HD74LS76AP into your circuit, test it using a known good setup to ensure it functions correctly.

10. Compliance:

    • Ensure that the use of the HD74LS76AP complies with all relevant safety and regulatory standards.

(For reference only)