Details

---

BUY IPD16CN10NG https://www.utsource.net/itm/p/12606466.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Output Current per Channel	IOUT	-	10	-	mA	Maximum continuous output current per channel
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range
Input Voltage Range	VIN	0	-	VDD	V	Input voltage range relative to ground
Output Low Voltage	VOL	0	0.1	0.3	V	Output low voltage at IOUT = 10mA
Output High Voltage	VOH	VDD-0.4	-	VDD-0.1	V	Output high voltage at IOUT = -2mA
Propagation Delay	tPD	-	10	-	ns	Propagation delay time from input to output (typical)
Power Dissipation	PD	-	-	350	mW	Maximum power dissipation per channel
Quiescent Current	IQ	-	1	-	渭A	Quiescent current per channel

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Connect the VDD pin to a stable power source and GND to the ground.

2. Input Signals:

   • Apply input signals (VIN) within the range of 0V to VDD.
   • Ensure input signals are not exceeded to avoid damage to the device.

3. Output Configuration:

   • The device can drive loads up to 10mA per channel.
   • Check the output low (VOL) and high (VOH) voltages to ensure they meet the requirements of the connected load.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the storage temperature range of -65掳C to 150掳C.

5. Propagation Delay:

   • Account for the typical propagation delay of 10ns when designing timing-sensitive circuits.

6. Power Dissipation:

   • Ensure the power dissipation per channel does not exceed 350mW to prevent overheating.
   • Use appropriate heat sinks or cooling methods if necessary.

7. Quiescent Current:

   • The quiescent current per channel is typically 1渭A, which should be considered in low-power applications.

8. Handling and Storage:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Store the device in a dry environment to prevent moisture-related issues.

(For reference only)