Details

---

BUY FF60UP30DN https://www.utsource.net/itm/p/12606472.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	60	V	Operating input voltage range
Output Voltage	VOUT	-	30	-	V	Regulated output voltage
Output Current	IOUT	-	1.5	3	A	Continuous output current
Efficiency	畏	-	92	-	%	Typical efficiency at nominal load
Switching Frequency	fSW	-	300	-	kHz	Switching frequency
Quiescent Current	IQ	-	0.5	-	mA	Quiescent current
Dropout Voltage	VDROPOUT	-	0.5	-	V	Dropout voltage
Operating Temperature	TOPR	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTG	-55	-	150	掳C	Storage temperature range
Thermal Resistance	R胃JA	-	40	-	掳C/W	Junction-to-ambient thermal resistance

Instructions:

1. Input Connection:

   • Connect the input voltage (VIN) to the input terminal.
   • Ensure the input voltage is within the specified range (4.5V to 60V).

2. Output Connection:

   • Connect the output terminals to the load.
   • The output voltage (VOUT) is regulated to 30V.

3. Load Regulation:

   • The device can provide a continuous output current up to 3A.
   • For optimal performance, keep the load within the recommended range.

4. Thermal Management:

   • Ensure adequate heat dissipation to maintain the junction temperature within safe limits.
   • Use a heatsink if necessary, especially under high load conditions.

5. Efficiency:

   • The device operates with a typical efficiency of 92% at nominal load conditions.
   • Monitor the efficiency to ensure optimal performance.

6. Operating and Storage Temperature:

   • Operate the device within the temperature range of -40掳C to 125掳C.
   • Store the device within the temperature range of -55掳C to 150掳C.

7. ** Dropout Voltage:**

   • The dropout voltage is 0.5V. Ensure that the input voltage is at least 0.5V higher than the output voltage for proper regulation.

8. Quiescent Current:

   • The quiescent current is typically 0.5mA. This is the current consumed by the device when it is active but not driving a load.

9. Switching Frequency:

   • The switching frequency is set to 300kHz. This helps in reducing the size of external components like inductors and capacitors.

10. Safety Precautions:

    • Always follow standard safety procedures when handling electronic components.
    • Avoid short circuits and overvoltage conditions to prevent damage to the device.

(For reference only)