Details

---

BUY T460 https://www.utsource.net/itm/p/12606483.html

Parameter	Description
Part Number	T460
Type	Transistor
Polarity	NPN
Collector-Emitter Voltage (Vce)	60V
Emitter-Base Voltage (Veb)	5V
Collector Current (Ic)	1A
Power Dissipation (Ptot)	65W
Operating Temperature Range	-55掳C to 150掳C
Package	TO-220
Mounting Style	Through-hole

Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the leads and body.
   • Avoid exposure to static electricity.

2. Mounting:

   • Ensure proper alignment of the transistor with the PCB or heatsink.
   • Apply thermal paste between the transistor and heatsink for better heat dissipation.
   • Tighten the mounting screws to the recommended torque specification to prevent mechanical stress.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Use a soldering iron with a temperature of 350掳C to 400掳C.
   • Solder each lead for 2 to 3 seconds to ensure a good connection without overheating.
   • Allow the solder joints to cool naturally.

4. Electrical Connections:

   • Connect the collector (C) to the high-voltage side of the circuit.
   • Connect the emitter (E) to the low-voltage side of the circuit.
   • Connect the base (B) to the control signal source.
   • Ensure that the maximum ratings for Vce, Veb, Ic, and Ptot are not exceeded.

5. Testing:

   • Use a multimeter to check for continuity between the leads.
   • Test the transistor in a controlled environment to verify its performance.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in anti-static packaging to protect from ESD (Electrostatic Discharge).

(For reference only)