Details

---

BUY ICS570A https://www.utsource.net/itm/p/12606489.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating voltage range	1.7	-	3.6	V
Standby Current (ISB)	Current consumption in standby mode	-	0.1	-	渭A
Active Current (IACT)	Current consumption in active mode	-	20	-	渭A
Output Voltage (VOH)	High-level output voltage	-	VDD - 0.4	VDD - 0.1	V
Output Voltage (VOL)	Low-level output voltage	0.1	-	0.4	V
Output Current (IOH)	High-level output current	-	-	10	mA
Output Current (IOL)	Low-level output current	-	-	10	mA
Input Voltage (VIN)	Valid input voltage range	0	-	VDD	V
Propagation Delay (tPD)	Time delay from input to output	-	10	-	ns
Operating Temperature (Toper)	Range of ambient operating temperature	-40	-	85	掳C
Storage Temperature (Tstg)	Range of storage temperature	-65	-	150	掳C

Instructions for Using ICS570A

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 1.7V to 3.6V.
   • Connect the VDD pin to the positive power supply and GND pin to the ground.

2. Current Consumption:

   • In standby mode, the device consumes approximately 0.1 渭A.
   • In active mode, the device consumes approximately 20 渭A.

3. Output Levels:

   • The high-level output voltage (VOH) should be at least VDD - 0.4V and can go up to VDD - 0.1V.
   • The low-level output voltage (VOL) should be between 0.1V and 0.4V.

4. Output Current:

   • The device can source or sink up to 10 mA of current on its output pins.

5. Input Voltage:

   • The valid input voltage range is from 0V to VDD.

6. Propagation Delay:

   • The typical propagation delay (tPD) from input to output is 10 ns.

7. Temperature Ranges:

   • The device operates within an ambient temperature range of -40掳C to 85掳C.
   • The storage temperature range is -65掳C to 150掳C.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the component.
   • Use appropriate ESD protection when handling and soldering the device.

9. Layout Considerations:

   • Place decoupling capacitors close to the power supply pins to ensure stable operation.
   • Use short and wide traces for power and ground connections to minimize inductance and resistance.

10. Testing:

    • Before finalizing the design, test the device under various conditions to ensure it meets the required specifications.

(For reference only)