Details

---

BUY HMC624LP4ETR https://www.utsource.net/itm/p/12606492.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage	4.75	5.0	5.25	V
Supply Current (Icc)	Quiescent current	-	380	-	mA
Output Power (Pout)	Typical output power at 1 dB compression	-	23	-	dBm
Gain (G)	Small signal gain	-	20	-	dB
Noise Figure (NF)	Noise figure at 1 GHz	-	2.5	-	dB
Input Return Loss (RLin)	Input return loss at 1 GHz	-	15	-	dB
Output Return Loss (RLo)	Output return loss at 1 GHz	-	15	-	dB
Input IP3 (IP3in)	Third-order intercept point at input	-	30	-	dBm
Output IP3 (IP3out)	Third-order intercept point at output	-	43	-	dBm
Operating Temperature (Toper)	Operating temperature range	-40	-	85	掳C
Storage Temperature (Tstorage)	Storage temperature range	-55	-	150	掳C
Package Type	Surface mount package	-	-	-	LP4E

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.75V to 5.25V.
   • Connect a bypass capacitor (0.1 渭F) close to the Vcc pin to filter out noise.

2. Biasing:

   • The device is internally biased, so no external biasing components are required.

3. Input and Output Matching:

   • For optimal performance, match the input and output impedances to 50 ohms.
   • Use appropriate matching networks if necessary to achieve the desired impedance.

4. Thermal Management:

   • Ensure adequate heat dissipation by mounting the device on a suitable heatsink or thermal pad.
   • The thermal resistance (胃JA) of the LP4E package is approximately 55掳C/W.

5. Handling:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.

6. Soldering:

   • Use a reflow soldering profile suitable for surface mount devices.
   • Avoid excessive heat and ensure the soldering temperature does not exceed the maximum storage temperature.

7. Testing:

   • Before final assembly, test the device using a signal generator and spectrum analyzer to verify performance parameters such as gain, noise figure, and output power.

8. Storage:

   • Store the device in a dry, cool environment within the specified storage temperature range (-55掳C to 150掳C).

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)