Details

---

BUY JZC-33F-024-HS3(555) https://www.utsource.net/itm/p/12606494.html

Parameter	Value/Description
Model Number	JZC-33F-024-HS3(555)
Type	Relay
Coil Voltage	24V DC
Coil Power Consumption	1.2W (50mA @ 24V DC)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A, 250V AC / 10A, 30V DC
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	2500V AC for 1 minute
Contact Resistance	<100m惟 (initial), <150m惟 (after 10,000 operations)
Mechanical Life	10,000,000 operations
Electrical Life	100,000 operations (at rated load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Humidity	95% RH at +40掳C (non-condensing)
Dimensions	17.5mm (L) x 12.5mm (W) x 12.5mm (H)
Weight	5g
Terminal Type	Solder lug
Mounting	PCB mount

Instructions:

1. Installation:

   • Ensure the relay is mounted on a suitable PCB with adequate clearance from other components.
   • Solder the terminals securely to the PCB, ensuring good electrical connections.

2. Operation:

   • Apply the rated coil voltage (24V DC) to activate the relay.
   • The relay will switch the contacts to the normally open (NO) position when energized and return to the normally closed (NC) position when de-energized.

3. Testing:

   • Use a multimeter to verify the continuity of the contacts in both the energized and de-energized states.
   • Check the coil resistance to ensure it matches the specified value.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Ensure the operating environment is within the specified temperature and humidity ranges.

5. Safety:

   • Do not exceed the rated voltage or current for the coil or contacts.
   • Ensure proper insulation and isolation to prevent electrical shock.
   • Follow all local and international safety standards and regulations.

(For reference only)