Details

---

BUY JS24N-K https://www.utsource.net/itm/p/12606499.html

Parameter	Description	Value
Part Number	-	JS24N-K
Type	-	Reed Relay
Package	-	DIP-8
Coil Voltage	Operating voltage for the coil	5V DC
Coil Current	Current required to operate the coil	10mA
Contact Form	Configuration of relay contacts	SPDT (1C)
Contact Rating	Maximum current and voltage for contacts	1A @ 30V DC, 0.5A @ 125V AC
Insulation Resistance	Resistance between contacts and coil	>100M惟 at 500V DC
Contact Resistance	Resistance across closed contacts	<100m惟
Operating Time	Time to close contacts when energized	<1ms
Release Time	Time to open contacts when de-energized	<1ms
Mechanical Life	Number of operations without load	10,000,000 cycles
Electrical Life	Number of operations with rated load	100,000 cycles
Operating Temperature	Range of ambient temperatures	-40掳C to +85掳C
Storage Temperature	Range of storage temperatures	-40掳C to +125掳C
Weight	Weight of the component	2.5g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a PCB with proper spacing to avoid short circuits.
   • Use a socket if frequent replacement is expected.

2. Wiring:

   • Connect the coil terminals to the control circuit using the specified coil voltage.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit as required.

3. Operation:

   • Apply the rated coil voltage to activate the relay and close the NO contact.
   • Remove the voltage to deactivate the relay and return the contacts to their normal state.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the contacts with a soft, dry cloth if necessary.

5. Handling:

   • Handle the relay with care to avoid physical damage.
   • Avoid exposure to high humidity and corrosive environments.

6. Safety:

   • Do not exceed the maximum ratings for voltage and current.
   • Ensure proper grounding and isolation to prevent electrical shock.

(For reference only)