Details

---

BUY MMD50R380PRH https://www.utsource.net/itm/p/12606511.html

Parameter	Symbol	Value	Unit	Test Conditions
Maximum Drain-to-Source Voltage	VDS(max)	500	V	-
Maximum Gate-to-Source Voltage	VGS(max)	±20	V	-
Continuous Drain Current	ID	380	A	TC = 25°C, Pulse Width ≤ 10 μs, Duty Cycle ≤ 1%
Continuous Drain Current (TC = 100°C)	ID(TC=100°C)	266	A	-
Power Dissipation	PTOT	3500	W	TC = 25°C
Junction Temperature	TJ	-55 to +175	°C	-
Storage Temperature	TSTG	-55 to +175	°C	-
Total Gate Charge	QG	290	nC	VGS = 15 V, ID = 380 A
Input Capacitance	Ciss	4400	pF	VDS = 300 V, f = 1 MHz
Output Capacitance	Coss	110	pF	VDS = 300 V, f = 1 MHz
Reverse Transfer Capacitance	Crss	100	pF	VDS = 300 V, f = 1 MHz
On-State Resistance	RDS(on)	0.0047	Ω	VGS = 15 V, ID = 380 A
Turn-On Delay Time	tdon	100	ns	VGS = 15 V, ID = 380 A
Rise Time	tr	75	ns	VGS = 15 V, ID = 380 A
Turn-Off Delay Time	tdoff	100	ns	VGS = 15 V, ID = 380 A
Fall Time	tf	75	ns	VGS = 15 V, ID = 380 A

Instructions for Use:

1. Handling Precautions:

   • Avoid exposing the device to temperatures outside the specified operating range.
   • Handle the device with care to prevent mechanical damage.

2. Mounting:

   • Ensure proper heat sinking to manage the power dissipation, especially when operating at high currents.
   • Use appropriate mounting hardware to secure the device and ensure good thermal contact.

3. Electrical Connections:

   • Connect the gate and source terminals correctly to avoid damage from incorrect polarity.
   • Use short, low-inductance leads for gate drive connections to minimize switching losses.

4. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and temperature.
   • Ensure that the device is operated within the safe operating area (SOA) to prevent thermal runaway.

5. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Keep the device in its original packaging until ready for use to protect against static discharge.

6. Testing:

   • Use appropriate test equipment and methods to verify the performance of the device.
   • Follow the test conditions specified in the datasheet for accurate measurements.

7. Safety:

   • Always follow safety guidelines when handling high-voltage and high-current circuits.
   • Use protective equipment such as gloves and goggles when necessary.

(For reference only)