Details

---

BUY BUV83 https://www.utsource.net/itm/p/12606515.html

Parameter	Symbol	Value	Unit	Conditions
Maximum Repetitive Peak Reverse Voltage	VRSM	1000	V	-
Maximum DC Blocking Voltage	VRRM	800	V	-
Maximum Average Rectified Forward Current (TA = 25掳C)	IF(AV)	3.0	A	TA = 25掳C
Maximum Average Rectified Forward Current (TC = 75掳C)	IF(AV)	1.5	A	TC = 75掳C
Maximum RMS Current (TA = 25掳C)	IF(RMS)	4.24	A	TA = 25掳C, Sinusoidal Waveform
Maximum RMS Current (TC = 75掳C)	IF(RMS)	2.12	A	TC = 75掳C, Sinusoidal Waveform
Non-Repetitive Peak Surge Current (TA = 25掳C, t = 8.3 ms)	IFSM	60	A	TA = 25掳C, t = 8.3 ms
Non-Repetitive Peak Surge Current (TA = 25掳C, t = 10 渭s)	IFSM	180	A	TA = 25掳C, t = 10 渭s
Maximum Operating Junction Temperature	TJ	150	掳C	-
Storage Temperature Range	TSTG	-65 to 150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Handle the diode with care to avoid mechanical damage.
   • Ensure proper heat sinking if operating at high currents or temperatures.

2. Electrical Connections:

   • Connect the anode and cathode correctly to avoid reverse breakdown.
   • Use appropriate wire gauge to handle the maximum current ratings.

3. Thermal Management:

   • Ensure adequate cooling to prevent the junction temperature from exceeding 150掳C.
   • Consider using a heatsink if the diode will be operating near its maximum current or in high ambient temperatures.

4. Surge Current Handling:

   • Be aware of the non-repetitive peak surge current ratings and ensure that any surge conditions do not exceed these limits.
   • For repetitive surges, derate the current to avoid premature failure.

5. Storage:

   • Store the diode in a dry, cool place within the specified storage temperature range (-65掳C to 150掳C).

6. Testing:

   • Test the diode under controlled conditions to verify its performance before integrating it into the final application.

7. Compliance:

   • Ensure that the diode meets all relevant safety and compliance standards for your specific application.

(For reference only)