Details

---

BUY JY24H-K 24VDC https://www.utsource.net/itm/p/12606516.html

Parameter	Value
Model	JY24H-K
Voltage Rating	24V DC
Current Rating	10A (max)
Contact Form	SPDT (Single Pole Double Throw)
Coil Resistance	360惟 卤 10%
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	1000V AC for 1 minute
Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Mechanical Life	10,000 cycles
Electrical Life	1,000,000 cycles
Terminal Type	Quick Connect
Mounting	Panel Mount
Dimensions (LxWxH)	35mm x 25mm x 20mm
Weight	50g

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area away from direct heat sources.
   • Mount the relay securely on a flat surface using the provided mounting holes.

2. Wiring:

   • Connect the control circuit to the coil terminals (1 and 2).
   • Connect the load circuit to the common (COM), normally open (NO), and normally closed (NC) terminals.
   • Ensure all connections are tight and secure to prevent arcing or loose connections.

3. Operation:

   • Apply 24V DC to the coil terminals to energize the relay.
   • The NO contact will close, and the NC contact will open when the relay is energized.
   • When the power is removed from the coil, the contacts will return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry cloth to remove dust and debris.
   • Do not use abrasive materials or solvents that could damage the relay.

5. Safety:

   • Always disconnect power before performing any maintenance or wiring changes.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.
   • Ensure the relay is used within its specified voltage and current ratings to avoid damage or failure.

(For reference only)