Details

---

BUY G3M-202P-12VDC https://www.utsource.net/itm/p/12606555.html

Parameter	Value
Part Number	G3M-202P-12VDC
Type	Relay
Voltage (VDC)	12VDC
Current (A)	10A (resistive load)
Contact Form	SPDT (Single Pole Double Throw)
Coil Power (W)	0.48W
Insulation Resistance	100M惟 or more (500VDC)
Dielectric Strength	1000VAC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Operating Humidity	5% to 95% RH (non-condensing)
Contact Material	AgSnO2
Terminal Type	Solder Lug
Weight	10g

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature and humidity specifications.
   • Use appropriate soldering techniques to connect the relay terminals, ensuring a secure and reliable connection.

2. Power Supply:

   • Connect the coil terminals to a 12VDC power supply.
   • Ensure the power supply can provide the required current to energize the relay coil (0.48W).

3. Load Connection:

   • Connect the load to the NO (Normally Open) and COM (Common) terminals for normally open operation.
   • Connect the load to the NC (Normally Closed) and COM (Common) terminals for normally closed operation.

4. Operation:

   • When the coil is energized, the contacts will switch from their normal state to the actuated state.
   • When the coil is de-energized, the contacts will return to their normal state.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure the relay is not exposed to excessive vibration or mechanical shock.

6. Safety:

   • Do not exceed the maximum voltage and current ratings.
   • Ensure proper insulation and grounding to prevent electrical hazards.
   • Follow all local and national electrical codes and regulations.

(For reference only)