Details

---

BUY 60R360Q https://www.utsource.net/itm/p/12606565.html

Below is the parameter table and instructions for the 60R360Q component:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Rated Voltage	VR	-	60	-	V
Rated Current	IR	-	360	-	mA
Capacitance	C	10	22	47	pF
Dissipation Factor	DF	-	0.5	1.0	%
Insulation Resistance	RI	-	1000	-	M惟
Operating Temperature	Top	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	125	掳C

Instructions

1. Handling:

   • Handle the component with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling to prevent damage.

2. Mounting:

   • Ensure that the mounting surface is clean and free from contaminants.
   • Follow the recommended soldering profile to avoid thermal stress.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.

3. Soldering:

   • Preheat the component to 120-150掳C before soldering to reduce thermal shock.
   • Use a non-corrosive flux to ensure good solder joints.
   • Inspect the solder joints visually for quality and reliability.

4. Testing:

   • Perform visual inspection to check for any physical damage or defects.
   • Measure the capacitance and dissipation factor using a suitable LCR meter.
   • Verify the insulation resistance to ensure proper electrical isolation.

5. Storage:

   • Store the components in a dry, cool place to prevent moisture absorption.
   • Keep the components in their original packaging until ready for use.

6. Application:

   • The 60R360Q is suitable for decoupling, filtering, and bypass applications in various electronic circuits.
   • Ensure that the operating voltage does not exceed the rated voltage to prevent breakdown.

7. Safety:

   • Follow all safety guidelines and regulations when handling and using the component.
   • Dispose of any damaged or defective components according to local environmental regulations.

By following these instructions, you can ensure the reliable and safe operation of the 60R360Q component.

(For reference only)