Details

---

BUY IRFR4615PBF(1PCS) https://www.utsource.net/itm/p/12606574.html

Parameter	Value	Unit
Part Number	IRFR4615PBF
Description	N-Channel MOSFET
Package Type	TO-252 (DPAK)
Drain-Source Voltage	30	V
Gate-Source Voltage	卤20	V
Continuous Drain Current	4.7 (at 25掳C)	A
Pulsed Drain Current	18 (t = 10ms, Rth(j-c) = 1.8掳C/W)	A
Power Dissipation	2.6 (at 25掳C)	W
RDS(on)	8.5 (at VGS = 10V, ID = 4.7A)	m惟
Input Capacitance	1350 (at VDS = 10V, f = 1MHz)	pF
Output Capacitance	220 (at VDS = 10V, f = 1MHz)	pF
Reverse Transfer Capacitance	210 (at VDS = 10V, f = 1MHz)	pF
Thermal Resistance (Junction to Ambient)	62 (with typical heatsink)	掳C/W
Operating Temperature Range	-55 to +150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper handling to avoid static damage.
   • Use a heatsink if operating at high power levels to maintain junction temperature within safe limits.

2. Biasing:

   • Apply a gate-source voltage (V_GS) of at least 10V to ensure low R_DS(on).
   • Avoid exceeding the maximum gate-source voltage (卤20V) to prevent damage.

3. Current Limiting:

   • Do not exceed the continuous drain current (4.7A at 25掳C) or pulsed drain current (18A for 10ms pulses).
   • Use appropriate current limiting resistors or circuits to protect the MOSFET.

4. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150掳C.
   • Use thermal paste between the MOSFET and heatsink for better heat dissipation.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in anti-static packaging to prevent ESD damage.

6. Testing:

   • Use a multimeter to check for continuity and resistance values before installation.
   • Test the device under controlled conditions to verify its performance.

7. Soldering:

   • Use a soldering iron with a temperature setting suitable for the TO-252 package.
   • Avoid overheating during soldering to prevent damage to the MOSFET.

8. Safety:

   • Always follow standard electrical safety guidelines when working with high voltages and currents.
   • Ensure proper grounding and insulation to prevent electric shock.

(For reference only)