Details

---

BUY HEF4075BP https://www.utsource.net/itm/p/12606576.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VDD	3	-	18	V
Input Low Voltage	VIL	-0.5	-	VOL+0.5	V
Input High Voltage	VIH	VOH-0.5	-	VDD+0.5	V
Output Low Voltage	VOL	0.25	0.4	0.6	V
Output High Voltage	VOH	VDD-0.1	VDD-0.05	VDD	V
Input Leakage Current	IIL	-1	-	1	渭A
Output Leakage Current	IOL	-1	-	1	渭A
Propagation Delay Time	tpd	-	35	120	ns
Power Dissipation	PD	-	-	100	mW

Instructions for HEF4075BP:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 3V to 18V.
   • Connect the ground (GND) pin to a stable reference point.

2. Input Signals:

   • Input signals should be within the valid input voltage range:
     • Low input (V_IL): from -0.5V to V_OL + 0.5V.
     • High input (V_IH): from V_OH - 0.5V to V_DD + 0.5V.
   • Ensure input leakage current (I_IL) does not exceed 卤1 渭A.

3. Output Signals:

   • Output low voltage (V_OL) will be between 0.25V and 0.6V.
   • Output high voltage (V_OH) will be between V_DD - 0.1V and V_DD.
   • Ensure output leakage current (I_OL) does not exceed 卤1 渭A.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 35 ns, with a maximum of 120 ns.

5. Power Dissipation:

   • The maximum power dissipation (P_D) is 100 mW. Ensure proper heat dissipation if operating near this limit.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool environment to prevent moisture damage.

7. Testing and Verification:

   • Verify all connections and voltages before applying power.
   • Use a multimeter to check for correct operation and ensure no short circuits.

8. Schematic Integration:

   • Refer to the datasheet for recommended layout and decoupling capacitor placement to ensure stable operation.

(For reference only)