Details

---

BUY BT138-800G https://www.utsource.net/itm/p/12606600.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Rated Off-State Voltage	VDRM	-	-	800	V	-
Rated RMS On-State Current	IT(RMS)	-	8	-	A	-
Peak On-State Current (Non-repetitive)	ITSM	-	160	-	A	t = 10 ms, ITSM/IT(RMS) = 20
Gate Trigger Current	IGT	5	-	25	mA	VGT = 1.5 V, dI/dt = 10 A/渭s
Gate Trigger Voltage	VGT	0.65	-	1.5	V	IGT = 10 mA, dI/dt = 10 A/渭s
Maximum Junction Temperature	TJ(max)	-	-	125	掳C	-
Storage Temperature Range	TSTG	-40	-	125	掳C	-

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the leads and body.

2. Mounting:

   • Ensure proper heat sinking if operating at high currents or in high ambient temperatures.
   • Use appropriate mounting hardware to secure the device firmly.

3. Electrical Connections:

   • Connect the gate terminal to the control circuit with a short, low-inductance wire to minimize noise.
   • Ensure that the main terminals (anode and cathode) are connected correctly to avoid reverse polarity, which can cause damage.

4. Gate Triggering:

   • Apply a gate current (I_GT) of at least 5 mA to ensure reliable triggering.
   • The gate voltage (V_GT) should be within the range of 0.65 V to 1.5 V for proper operation.

5. Operating Conditions:

   • Do not exceed the rated off-state voltage (V_DRM) of 800 V.
   • The RMS on-state current (I_T(RMS)) should not exceed 8 A.
   • For non-repetitive peak on-state current (I_TSM), do not exceed 160 A for a duration of 10 ms.

6. Temperature Considerations:

   • Ensure that the junction temperature (T_J) does not exceed 125掳C.
   • The storage temperature range is from -40掳C to 125掳C.

7. Dissipation Management:

   • If operating near the maximum ratings, use adequate cooling methods such as heatsinks or forced air cooling to manage power dissipation.

8. Testing:

   • Before final installation, test the device under actual operating conditions to ensure it meets the required performance specifications.

9. Safety Precautions:

   • Always follow safety guidelines when handling high-voltage and high-current circuits.
   • Use appropriate protective equipment and follow all relevant safety standards.

(For reference only)