Details

---

BUY UPC4084C https://www.utsource.net/itm/p/12606612.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	-	4.5	-	20	V
Output Current per Gate	IO	VDD = 15V, TA = 25掳C	-	50	-	mA
Input Voltage (High)	VIH	-	70% VDD	-	VDD	V
Input Voltage (Low)	VIL	-	0	-	30% VDD	V
Propagation Delay Time	tp	VDD = 15V, TA = 25掳C	-	35	-	ns
Power Dissipation	PD	TA = 25掳C	-	-	600	mW
Operating Temperature	TA	-	-40	-	85	掳C
Storage Temperature	TSTG	-	-65	-	150	掳C

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range (4.5V to 20V). Exceeding these limits can damage the device.
2. Output Current: Each gate can source or sink up to 50mA. Do not exceed this limit to avoid overheating or damage.
3. Input Voltage Levels:
   • For a high input, the voltage should be at least 70% of V_DD.
   • For a low input, the voltage should be no more than 30% of V_DD.
4. Propagation Delay: The typical propagation delay is 35ns under standard conditions (V_DD = 15V, T_A = 25掳C).
5. Power Dissipation: The maximum power dissipation is 600mW at 25掳C ambient temperature. Ensure proper heat dissipation if operating near this limit.
6. Operating Temperature: The device is designed to operate between -40掳C and 85掳C. Avoid operating outside this range to prevent malfunction or damage.
7. Storage Temperature: Store the device between -65掳C and 150掳C to ensure long-term reliability.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Proper decoupling capacitors should be used near the power supply pins to reduce noise and ensure stable operation.
• When handling the device, use appropriate ESD protection to avoid damaging the sensitive components.

(For reference only)