Details

---

BUY HF118F 024-1ZS1T https://www.utsource.net/itm/p/12606629.html

Below is the parameter table and instructions for the HF118F 024-1ZS1T:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	Vin	20	-	36	V
Output Voltage	Vout	24	-	24	V
Output Current	Iout	-	1.5	2.0	A
Efficiency	畏	-	85	-	%
Switching Frequency	fsw	-	150	-	kHz
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstore	-40	-	125	掳C
No-Load Input Current	Iin(NL)	-	5	-	mA
Ripple Voltage (Output)	Vripple	-	50	-	mVp-p
Start-Up Time	tstart	-	200	-	ms
Short-Circuit Protection	SCP	-	Yes	-	-
Over-Voltage Protection	OVP	-	Yes	-	-
Over-Temperature Protection	OTP	-	Yes	-	-

Instructions

1. Installation:

   • Ensure that the input voltage is within the specified range (20V to 36V).
   • Connect the input terminals to the power source.
   • Connect the output terminals to the load.

2. Operation:

   • The module will start up automatically when the input voltage is applied.
   • Monitor the output voltage and current to ensure they are within the specified limits.
   • If the output voltage or current exceeds the limits, the protection circuits will activate to prevent damage.

3. Protection Features:

   • Short-Circuit Protection (SCP): The module will shut down if a short circuit is detected at the output.
   • Over-Voltage Protection (OVP): The module will shut down if the output voltage exceeds the safe limit.
   • Over-Temperature Protection (OTP): The module will shut down if the internal temperature exceeds the safe limit.

4. Maintenance:

   • Regularly inspect the connections and ensure they are tight and secure.
   • Keep the module clean and free from dust and debris.
   • Do not expose the module to extreme temperatures or humidity.

5. Troubleshooting:

   • No Output: Check the input voltage and connections.
   • Output Voltage Too High/Low: Verify the load and ensure it is within the specified range.
   • Module Shuts Down Frequently: Check for short circuits, over-voltage, or over-temperature conditions.

6. Storage:

   • Store the module in a dry, cool place away from direct sunlight.
   • Avoid storing the module in environments with high humidity or corrosive gases.

By following these parameters and instructions, you can ensure the reliable operation and longevity of the HF118F 024-1ZS1T module.

(For reference only)