Details

---

BUY 15N60C3.. https://www.utsource.net/itm/p/12606635.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCE	-	-	600	V
Emitter-Base Voltage	VEB	-	-	7	V
Collector Current	IC	-	-	15	A
Power Dissipation	PT	-	-	250	W
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Base-Emitter Saturation Voltage	VBE(sat)	-	2.5	3.5	V
Collector-Emitter Saturation Voltage	VCE(sat)	-	1.8	2.5	V
Turn-On Time	ton	-	0.5	1.5	渭s
Turn-Off Time	toff	-	1.5	4.5	渭s
Forward Current Transfer Ratio	hFE	-	10	30	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage the power dissipation.
   • Handle the device with care to avoid mechanical stress and damage.

2. Electrical Connections:

   • Connect the collector (C) to the high voltage side of the circuit.
   • Connect the emitter (E) to the low voltage side or ground.
   • Connect the base (B) to the control signal source.

3. Operational Limits:

   • Do not exceed the maximum ratings for V_CE, I_C, and P_T.
   • Ensure the junction temperature does not exceed 150掳C.

4. Thermal Management:

   • Use a heatsink to maintain the junction temperature within safe limits, especially under high power conditions.
   • Ensure adequate ventilation if the device is used in an enclosed space.

5. Storage:

   • Store the device in a dry, cool place within the storage temperature range (-55掳C to 150掳C).

6. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters before integrating it into the final application.

7. Safety Precautions:

   • Use appropriate safety measures when handling high voltages and currents.
   • Follow all relevant safety standards and guidelines.

(For reference only)