Details

---

BUY DFP50N06 https://www.utsource.net/itm/p/12606656.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	60	-	V	Continuous
Gate-Source Voltage	VGS	-15	-	15	V	Continuous
Continuous Drain Current	ID	-	-	50	A	TC = 25掳C, VDS = 25V, VGS = 10V
Pulse Drain Current	ID(pulse)	-	-	100	A	tp = 10ms, IG = 5A, TC = 25掳C
Power Dissipation	PD	-	-	125	W	TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C	-
Storage Temperature Range	TSTG	-55	-	150	掳C	-
Thermal Resistance, Junction to Case	R胃JC	-	1.0	-	掳C/W	-

Instructions for Using DFP50N06

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical damage.
   • Use appropriate heat sinks to manage thermal resistance and ensure the junction temperature does not exceed 175掳C.

2. Electrical Connections:

   • Ensure that the gate and source connections are made with low inductance leads to minimize switching losses.
   • Use a gate resistor (typically 10-100 ohms) to control the rise and fall times of the gate voltage.

3. Operating Conditions:

   • Do not exceed the maximum ratings for drain-source voltage, gate-source voltage, and continuous drain current.
   • For pulse operation, ensure that the pulse duration and frequency do not cause the device to exceed its maximum power dissipation or junction temperature limits.

4. Thermal Management:

   • Monitor the junction temperature during operation to prevent overheating.
   • Use a heatsink with adequate thermal conductivity and surface area to dissipate heat effectively.

5. Storage:

   • Store the device in a dry, cool environment within the specified storage temperature range (-55掳C to 150掳C).
   • Avoid exposure to high humidity and corrosive environments.

6. Testing:

   • Before applying power, verify all connections and ensure that the device is properly mounted and cooled.
   • Perform initial tests at reduced power levels to check for proper operation and thermal management.

7. Safety:

   • Follow all relevant safety guidelines and regulations when handling and operating the device.
   • Use appropriate personal protective equipment (PPE) when working with high voltages and currents.

(For reference only)