Details

---

BUY 832A-1C-S 24VDC https://www.utsource.net/itm/p/12606670.html

Parameter	Value
Part Number	832A-1C-S 24VDC
Type	Relay
Supply Voltage	24 VDC
Coil Power Consumption	0.6 W (typical)
Coil Resistance	400 惟 (nominal)
Contact Configuration	SPDT (Single Pole, Double Throw)
Contact Rating	5 A at 250 VAC / 30 VDC
Contact Material	Silver Alloy
Insulation Resistance	> 100 M惟 at 500 VDC
Dielectric Strength	1000 VAC for 1 minute
Operating Temperature	-40掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Dimensions	17.5 mm x 12.5 mm x 12.5 mm
Weight	5 g

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface to avoid mechanical stress.

2. Wiring:

   • Connect the 24 VDC supply to the coil terminals.
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.

3. Operation:

   • When the 24 VDC is applied to the coil, the relay will energize, and the contacts will switch from their default position to the activated position.
   • When the power is removed, the relay will de-energize, and the contacts will return to their default position.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the contacts with a soft, dry cloth if necessary.

5. Safety:

   • Do not exceed the maximum voltage and current ratings.
   • Ensure the relay is disconnected from the power source before performing any maintenance or testing.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)