Details

---

BUY TRG1 D-12VDC-S-H https://www.utsource.net/itm/p/12606671.html

Parameter	Description
Model Number	TRG1 D-12VDC-S-H
Type	Relay
Supply Voltage	12V DC
Coil Resistance	300惟
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A, 250V AC / 30V DC
Insulation Voltage	1000V AC
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Switching Capacity	250V AC, 10A; 30V DC, 10A
Life Expectancy	100,000 operations
Dimensions	17.5mm x 12.2mm x 9.6mm
Weight	4g

Instructions:

1. Installation: Ensure the relay is mounted on a flat surface with adequate ventilation to prevent overheating.
2. Power Supply: Connect the relay coil terminals to a 12V DC power supply. Verify polarity as incorrect connection can damage the relay.
3. Control Circuit: Apply voltage to the coil terminals to actuate the relay. The common terminal will switch between normally open (NO) and normally closed (NC) contacts.
4. Load Connection: Connect your load to the appropriate contact terminals ensuring not to exceed the maximum current or voltage ratings.
5. Testing: Before full-scale operation, test the relay under load conditions to ensure proper switching and functionality.
6. Maintenance: Periodically inspect the relay for signs of wear or damage. Replace if any issues are detected.
7. Disposal: Dispose of the relay according to local regulations concerning electronic components.

(For reference only)