Details

---

BUY RCL114024 https://www.utsource.net/itm/p/12606681.html

Parameter	Value	Unit
Part Number	RCL114024	-
Type	Chip Resistor	-
Resistance	11.4	惟
Tolerance	卤1%	%
Power Rating	0.25	W
Operating Voltage	50	V
Temperature Range	-55 to +125	掳C
Package	0805	-
Mounting	Surface Mount	-

Instructions for Use:

1. Handling:

   • Handle with care to avoid damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Mounting:

   • Place the resistor on the PCB (Printed Circuit Board) according to the design layout.
   • Use a soldering iron or reflow oven to solder the resistor to the PCB.
   • Ensure that the solder joints are clean and free of voids.

3. Soldering:

   • Preheat the PCB to the recommended temperature before soldering.
   • Apply a small amount of flux to the pads.
   • Solder the resistor using a temperature-controlled soldering iron or reflow process.
   • Allow the solder to cool naturally without disturbance.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and alignment.
   • Use a multimeter to verify the resistance value and ensure it meets the specified tolerance.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to prevent contamination.

6. Disposal:

   • Dispose of any defective components in accordance with local regulations.

(For reference only)