Details

---

BUY HN58C65FPI-25T https://www.utsource.net/itm/p/12606695.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	Vcc	4.75	5	5.25	V
Operating Temperature	Topr	-40		85	掳C
Storage Temperature	Tstg	-55		150	掳C
Maximum Junction Temperature	Tjmax			150	掳C
Input Voltage (High)	VIH	3.15		5.25	V
Input Voltage (Low)	VIL	0		1.85	V
Output Current (Sink)	IOL		16	20	mA
Output Current (Source)	IOH		-4	-8	mA
Propagation Delay Time	tpd		10	25	ns
Power Consumption	Pd		200		mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.75V to 5.25V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Temperature Considerations:

   • The device is designed to operate within an ambient temperature range of -40掳C to 85掳C.
   • Store the device in temperatures ranging from -55掳C to 150掳C.

3. Input Voltage Levels:

   • For a valid high input, the voltage should be between 3.15V and 5.25V.
   • For a valid low input, the voltage should be between 0V and 1.85V.

4. Output Current:

   • The device can sink up to 20mA and source up to -8mA.
   • Ensure the load connected to the output does not exceed these current limits.

5. Propagation Delay:

   • The typical propagation delay time is 10ns, with a maximum of 25ns.
   • This delay should be considered when designing timing-sensitive circuits.

6. Power Consumption:

   • The maximum power consumption is 200mW.
   • Ensure adequate heat dissipation if operating at high power levels or in high-temperature environments.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place to prevent moisture-related issues.

8. Mounting and Soldering:

   • Follow standard soldering practices to ensure reliable connections.
   • Avoid excessive heat during soldering to prevent damage to the device.

9. Testing and Verification:

   • After assembly, verify the correct operation of the device by testing its inputs and outputs under various conditions.
   • Use appropriate test equipment to ensure accurate measurements.

(For reference only)