Details

---

BUY IPD35N10S3L-26 https://www.utsource.net/itm/p/12606698.html

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Drain-Source Voltage	VDS		-10		100	V
Gate-Source Voltage	VGS		-20		20	V
Continuous Drain Current	ID	TC = 25掳C		35		A
Pulse Drain Current	ID(p)	tp = 10 渭s		100		A
Power Dissipation	PTOT	TC = 25掳C		260		W
Junction Temperature	TJ		-55		175	掳C
Storage Temperature	TSTG		-55		150	掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures to prevent damage from static electricity.

2. Mounting and Soldering:

   • Ensure that the soldering temperature does not exceed 260掳C.
   • The soldering time should be kept within 10 seconds to avoid thermal damage.
   • Allow the device to cool down naturally after soldering.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (V_GS) does not exceed the maximum ratings to prevent device failure.

4. Thermal Management:

   • Ensure adequate heat sinking to keep the junction temperature (T_J) within the specified limits.
   • Use thermal paste or other thermal interface materials to improve heat transfer between the device and the heatsink.

5. Operating Conditions:

   • Do not exceed the continuous drain current (I_D) and power dissipation (P_TOT) ratings.
   • For pulse operation, ensure that the pulse duration and frequency do not exceed the specified limits.

6. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Avoid exposure to extreme temperatures outside the storage temperature range.

7. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Use appropriate test equipment and follow safety guidelines to prevent damage or injury.

8. Documentation:

   • Refer to the datasheet and application notes for detailed information on the device characteristics and recommended operating conditions.

(For reference only)