Details

---

BUY MUR880E https://www.utsource.net/itm/p/12606699.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Forward Voltage	VF	IF = 8.0A, Tj = 25掳C	-	1.1	1.3	V
Reverse Recovery Time	trr	IF = 8.0A, Tj = 25掳C	-	45	-	ns
Peak Reverse Voltage	VRRM		-	800	-	V
RMS Voltage	VRMS		-	566	-	V
Average Rectified Output Current	IOAV	Tc = 75掳C	-	8.0	-	A
Surge Current	I FSM	tp = 8.3ms (sine half wave)	-	200	-	A

Instructions for MUR880E:

1. Installation:

   • Ensure that the device is mounted on a heatsink if continuous operation at high currents or in high ambient temperatures is expected.
   • Use appropriate mounting hardware to secure the device and ensure good thermal contact.

2. Handling:

   • Handle with care to avoid damage to the leads or body of the component.
   • Observe anti-static precautions to prevent damage from electrostatic discharge (ESD).

3. Operating Conditions:

   • Ensure that the operating voltage does not exceed the peak reverse voltage (VRRM).
   • Keep the junction temperature within specified limits to maintain reliability.

4. Testing:

   • When testing the device, adhere to the conditions specified in the parameter table to obtain accurate results.
   • Avoid exceeding the maximum ratings during testing as this can lead to device failure.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Follow manufacturer guidelines for storage time and conditions to ensure long-term reliability.

6. Soldering:

   • Use a soldering temperature not exceeding 260掳C for no longer than 10 seconds per operation.
   • Allow adequate cooling between multiple soldering operations.

(For reference only)