Details

---

BUY FM8502A https://www.utsource.net/itm/p/12606717.html

Below is the parameter table and instructions for the FM8502A, formatted as requested:

FM8502A Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	Vcc	2.7	5.0	5.5	V
Operating Current	Icc	-	10	20	mA	Active Mode
Standby Current	Isb	-	1	5	渭A	Standby Mode
Output Voltage (High)	VOH	-	Vcc - 0.4	Vcc - 0.1	V	IO = -1 mA
Output Voltage (Low)	VOL	0	0.4	0.9	V	IO = 1 mA
Input Voltage Range	VIN	0	-	Vcc	V
Maximum Input Current	IIN	-	100	200	渭A
Maximum Output Current	IOUT	-	100	200	mA
Operating Temperature	Toper	-40	25	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Humidity	RH	0	-	95	%	Non-condensing

FM8502A Instructions

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Current Consumption:

   • The operating current (Icc) is typically around 10 mA but can go up to 20 mA in active mode.
   • In standby mode, the current consumption (Isb) is very low, typically around 1 渭A.

3. Output Voltage:

   • The output voltage high (VOH) should be at least Vcc - 0.4V and can go up to Vcc - 0.1V when the output current (IO) is -1 mA.
   • The output voltage low (VOL) should be between 0V and 0.9V when the output current (IO) is 1 mA.

4. Input Voltage:

   • The input voltage (VIN) should be within the range of 0V to Vcc to ensure proper operation.

5. Current Handling:

   • The maximum input current (IIN) should not exceed 200 渭A.
   • The maximum output current (IOUT) should not exceed 200 mA.

6. Temperature:

   • The operating temperature (Toper) should be between -40掳C and 85掳C.
   • The storage temperature (Tstg) should be between -65掳C and 150掳C.

7. Humidity:

   • The device should be stored in a non-condensing environment with humidity levels between 0% and 95%.

8. Handling and Installation:

   • Handle the device with care to avoid static discharge.
   • Follow standard surface mount technology (SMT) procedures for installation.

9. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets all specifications.

10. Troubleshooting:

    • If the device does not operate as expected, check the power supply, connections, and environmental conditions.
    • Refer to the datasheet for detailed troubleshooting steps.

By following these parameters and instructions, you can ensure optimal performance and reliability of the FM8502A.

(For reference only)