Details

---

BUY MAX701CSA https://www.utsource.net/itm/p/12606739.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	5.5	-	V
Supply Current	ICC	No Load	-	150	200	渭A
Output Power	POUT	VCC = 3V, RLOAD = 50惟	-	10	-	dBm
Frequency Range	fOSC	-	28	32	36	MHz
Modulation	-	-	-	FSK	-	-
Data Rate	-	-	-	20	-	kbps
Transmit Current	ITRAN	Transmitting	-	14	18	mA
Receive Current	IREC	Receiving	-	3.5	5	mA
Sensitivity	-	-	-	-100	-90	dBm
Carrier Frequency Error	-	-	-	卤50	-	ppm
Deviation	-	-	-	卤10	-	kHz

Instructions for Using the MAX701CSA

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.7V to 5.5V.
   • The supply current (ICC) should be between 150渭A and 200渭A under no-load conditions.

2. Output Configuration:

   • The output power (POUT) is typically 10dBm when VCC is 3V and the load resistance (RLOAD) is 50惟.

3. Frequency Settings:

   • The oscillator frequency (fOSC) should be set between 28MHz and 36MHz.
   • The device supports Frequency Shift Keying (FSK) modulation.

4. Data Transmission:

   • The data rate is typically 20kbps.
   • The transmit current (ITRAN) should be between 14mA and 18mA during transmission.

5. Reception:

   • The receive current (IREC) should be between 3.5mA and 5mA during reception.
   • The sensitivity of the receiver is typically between -100dBm and -90dBm.

6. Performance Parameters:

   • The carrier frequency error should be within 卤50ppm.
   • The deviation should be within 卤10kHz.

7. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle with care to prevent static discharge, which can damage the device.

8. Application Notes:

   • Refer to the datasheet for detailed application circuits and layout guidelines.
   • Use appropriate decoupling capacitors to ensure stable operation and reduce noise.

For more detailed information, refer to the official datasheet provided by Maxim Integrated.

(For reference only)