Details

---

BUY CF32007NW https://www.utsource.net/itm/p/12606742.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7		5.5	V	Operating supply voltage range
Output Current	IOUT		300		mA	Maximum continuous output current
Quiescent Current	IQ		1.5		渭A	Quiescent current at no load
Dropout Voltage	VDROPOUT		0.3		V	Dropout voltage at maximum load
Shutdown Current	ISD		0.1		渭A	Shutdown mode supply current
Enable Voltage	VEN		1.2		V	Input voltage to activate enable pin
Operating Temperature	TOPR	-40		85	掳C	Operating temperature range

Instructions for CF32007NW:

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VDD pin.
   • Connect the negative terminal (GND) to the ground pin.

2. Output Configuration:

   • Connect the load between the VOUT pin and the GND pin.

3. Enable Pin (EN):

   • Apply a voltage greater than VEN to the EN pin to activate the device.
   • To disable, apply a voltage less than VEN or connect it to GND.

4. Capacitor Requirements:

   • Place a ceramic capacitor (typically 1渭F) close to the VDD and GND pins for stability.
   • An additional capacitor may be required at the output depending on the load characteristics.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current and temperature limits.

6. Handling Precautions:

   • Handle with care as ESD (Electrostatic Discharge) can damage the component.
   • Follow proper soldering techniques to avoid thermal stress.

7. Storage:

   • Store in a dry environment and follow recommended storage conditions to prevent moisture damage.

(For reference only)