Details

---

BUY IRFR3504Z https://www.utsource.net/itm/p/12606750.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Drain-Source On-State Resistance	RDS(on)	-	5.2	-	m惟	VGS = 10V, ID = 25A
Gate-Source Threshold Voltage	VGS(th)	2.0	3.0	4.0	V	ID = 250 渭A
Input Capacitance	Ciss	-	2670	-	pF	VDS = 10V
Output Capacitance	Coss	-	180	-	pF	VDS = 10V
Reverse Transfer Capacitance	Crss	-	320	-	pF	VDS = 10V, ID = 25A
Maximum Drain Current	ID	-	-	90	A	Tj = 25掳C
Maximum Pulse Drain Current	ID(p)	-	-	180	A	tp = 10 渭s, ID(av) = 90A
Maximum Gate-Source Voltage	VGS(max)	-	-	卤20	V	-
Maximum Drain-Source Voltage	VDS(max)	-	-	55	V	-
Power Dissipation	PD	-	-	150	W	TC = 25掳C
Junction Temperature	Tj	-	-	150	掳C	-
Storage Temperature Range	Tstg	-55	-	150	掳C	-

Instructions for Use:

1. Handling Precautions:

   • The IRFR3504Z is sensitive to electrostatic discharge (ESD). Handle with care and use proper ESD protection.
   • Avoid exceeding the maximum ratings specified in the table to prevent damage.

2. Mounting:

   • Ensure proper thermal management by using a heatsink if necessary, especially when operating at high power levels.
   • Use a suitable thermal interface material (TIM) between the device and the heatsink to enhance heat dissipation.

3. Gate Drive:

   • Apply a gate-source voltage (V_GS) within the recommended range to ensure reliable operation.
   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).

4. Circuit Design:

   • Design the circuit to minimize parasitic inductances and capacitances to improve performance and reliability.
   • Ensure that the drain-source voltage (V_DS) does not exceed the maximum rating during operation.

5. Testing:

   • When testing the device, start with low currents and voltages to verify correct operation before increasing to higher levels.
   • Monitor the junction temperature (T_j) to ensure it remains within safe limits.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against moisture and static damage.

(For reference only)