Details

---

BUY UC3846DW https://www.utsource.net/itm/p/12606754.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage range	10	-	40	V
Startup Current	Current required to start the IC	-	2	-	mA
Operating Temperature	Temperature range for operation	-40	-	125	掳C
Output Current (Iout)	Maximum output current	-	1	1.5	A
Switching Frequency (fsw)	Typical switching frequency	-	100	-	kHz
Duty Cycle Range	Range of duty cycle	0	-	100	%
Minimum On-Time (ton(min))	Minimum on-time for the switch	-	0.5	-	渭s
Maximum Off-Time (toff(max))	Maximum off-time for the switch	-	10	-	渭s
Reference Voltage (Vref)	Internal reference voltage	4.95	5	5.05	V
Input Bias Current (Ibias)	Input bias current	-	0.1	-	渭A
Power Dissipation (Pd)	Maximum power dissipation	-	1.5	-	W
Storage Temperature	Temperature range for storage	-65	-	150	掳C

Instructions for UC3846DW

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the specified range of 10V to 40V to avoid damage to the IC.

2. Startup Current:

   • The IC requires a startup current of approximately 2mA. Ensure that the power supply can provide this current.

3. Operating Temperature:

   • The IC is designed to operate within a temperature range of -40掳C to 125掳C. Ensure proper heat sinking if operating at high temperatures.

4. Output Current (Iout):

   • The maximum output current is 1.5A. Do not exceed this limit to prevent overheating or damage.

5. Switching Frequency (fsw):

   • The typical switching frequency is 100kHz. Adjust external components to achieve the desired frequency.

6. Duty Cycle Range:

   • The duty cycle can be set between 0% and 100%. Use the control circuitry to adjust the duty cycle as needed.

7. Minimum On-Time (ton(min)):

   • The minimum on-time for the switch is 0.5渭s. Ensure that the pulse width is not shorter than this value.

8. Maximum Off-Time (toff(max)):

   • The maximum off-time for the switch is 10渭s. Ensure that the pulse width does not exceed this value.

9. Reference Voltage (Vref):

   • The internal reference voltage is 5V 卤 0.05V. Use this voltage for accurate regulation.

10. Input Bias Current (Ibias):

    • The input bias current is typically 0.1渭A. This is important for biasing the input stages.

11. Power Dissipation (Pd):

    • The maximum power dissipation is 1.5W. Ensure proper thermal management to keep the IC within safe operating limits.

12. Storage Temperature:

    • Store the IC in an environment with a temperature range of -65掳C to 150掳C to maintain its integrity.

Additional Notes:

• Always refer to the datasheet for detailed information and specific application notes.
• Use appropriate decoupling capacitors near the Vcc pin to ensure stable operation.
• Proper PCB layout and grounding techniques are crucial for optimal performance.

(For reference only)