Details

---

BUY BTA12-800 https://www.utsource.net/itm/p/12606764.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Rated Off-state Voltage	VDRM	-	800	-	V	Maximum repetitive peak off-state voltage
Rated RMS On-state Current	IT(RMS)	-	12	-	A	Maximum RMS on-state current
Non-repetitive Peak On-state Current	I TM	-	150	-	A	Maximum non-repetitive peak on-state current
Turn-on Sensitivity	IT(tr)	35	65	-	mA	Gate trigger current
Holding Current	IH	5	50	-	mA	Minimum current to maintain on-state condition
Power Dissipation	PD	-	-	150	W	Maximum power dissipation

Instructions for BTA12-800:

1. Mounting and Handling:

   • Ensure proper heat sinking if operating near maximum current ratings.
   • Handle with care to avoid damage to the sensitive gate terminal.

2. Circuit Design:

   • Use a suitable gate resistor to limit gate current and protect the device from transient spikes.
   • Ensure that the circuit design accommodates the maximum rated off-state voltage and does not exceed the non-repetitive peak on-state current limits.

3. Operating Conditions:

   • Keep the junction temperature within safe limits by ensuring adequate cooling, especially at high current levels.
   • Avoid exceeding the holding current threshold to prevent unintended turn-off during operation.

4. Testing and Troubleshooting:

   • Verify correct installation and connections before applying power.
   • Monitor device temperature and performance parameters regularly to ensure reliable operation.

5. Storage:

   • Store in a dry, cool environment away from direct sunlight and sources of electromagnetic interference.

This table and set of instructions provide essential information for safely using and integrating the BTA12-800 triac into electronic circuits.

(For reference only)