Details

---

BUY JQX-15F(T90)-12VDC https://www.utsource.net/itm/p/12606775.html

Parameter	Description
Model	JQX-15F(T90)-12VDC
Type	Relay
Coil Voltage	12V DC
Coil Power	180mW
Coil Resistance	667惟
Pick-up Voltage	7.2V DC (max)
Drop-out Voltage	1.2V DC (max)
Contact Form	SPDT (Single Pole Double Throw)
Rated Load	10A, 250V AC / 10A, 30V DC
Contact Resistance	50m惟 (max)
Insulation Resistance	100M惟 (min) at 500V DC
Dielectric Strength	2500V AC (min) for 1 minute
Mechanical Life	10 million operations (min)
Electrical Life	100,000 operations (min) under rated load
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Weight	15g
Dimensions	15mm x 15mm x 12.5mm

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use appropriate mounting hardware to secure the relay.

2. Wiring:

   • Connect the coil terminals to the 12V DC power supply.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load and control circuit as required.

3. Operation:

   • When the coil is energized, the normally open contact (NO) will close, and the normally closed contact (NC) will open.
   • When the coil is de-energized, the normally open contact (NO) will open, and the normally closed contact (NC) will close.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a soft, dry cloth if necessary.

5. Safety:

   • Do not exceed the rated voltage and current specifications.
   • Ensure proper insulation and grounding to prevent electrical shock.
   • Avoid operating the relay in environments with excessive dust, moisture, or corrosive gases.

(For reference only)