Details

---

BUY NF2E-24V-C https://www.utsource.net/itm/p/12606781.html

Parameter	Description	Value
Part Number	Product Identifier	NF2E-24V-C
Type	Relay Type	SPDT (Single Pole, Double Throw)
Voltage	Coil Voltage	24V DC
Current	Coil Current	30mA
Power Consumption	Coil Power Consumption	0.72W
Contact Rating	Switching Capacity	10A at 250V AC
Insulation Resistance	Between Contacts and Coil	100M惟 min @ 500V DC
Dielectric Strength	Between Contacts and Coil	1500V AC for 1 minute
Operating Temperature	Operating Range	-40掳C to +85掳C
Storage Temperature	Storage Range	-40掳C to +125掳C
Contact Material	Contact Material	Silver Alloy
Mounting	Mounting Type	PCB Through-Hole
Dimensions	Physical Size	17.5 x 12.5 x 12.5 mm
Weight	Weight	6g

Instructions for Use

1. Installation:

   • Ensure the relay is installed in a clean, dry environment.
   • Mount the relay on a PCB using the through-hole terminals.
   • Solder the terminals securely to ensure a reliable connection.

2. Coil Connection:

   • Connect the coil terminals to a 24V DC power supply.
   • Ensure the polarity is correct to avoid damage to the relay.

3. Contact Connection:

   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
   • Ensure the load current does not exceed the contact rating.

4. Operation:

   • When the coil is energized, the common contact will switch from the normally closed (NC) to the normally open (NO) position.
   • When the coil is de-energized, the common contact will return to the normally closed (NC) position.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth if necessary.
   • Do not use abrasive materials or solvents that could damage the relay.

6. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive substances.

7. Safety Precautions:

   • Always disconnect power before handling the relay.
   • Follow all local electrical codes and regulations.
   • Use appropriate personal protective equipment (PPE) when working with electrical components.

(For reference only)