Details

---

BUY FCP-1000 https://www.utsource.net/itm/p/12606800.html

Parameter	Description
Model Number	FCP-1000
Type	Capacitive Proximity Sensor
Operating Voltage	10 - 30 VDC
Current Consumption	< 50 mA (at 24 VDC)
Detection Range	10 mm (adjustable)
Output Type	NPN/PNP (configurable)
Response Time	< 1 ms
Hysteresis	10% of detection range
Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Protection Class	IP67
Material	Housing: PBT, Sensing Face: Stainless Steel
Weight	20 g
Mounting	M12 x 1 thread

Instructions for Use

1. Power Supply Connection

   • Connect the power supply to the sensor according to the wiring diagram provided. Ensure the voltage is within the operating range (10 - 30 VDC).

2. Output Configuration

   • Configure the output type (NPN or PNP) as required. This can typically be done using a DIP switch or via a programming interface, depending on the model.

3. Mounting

   • Mount the sensor using the M12 x 1 thread. Ensure it is securely fastened to avoid movement during operation.

4. Adjusting Detection Range

   • Adjust the detection range using the potentiometer on the sensor. Turn the potentiometer clockwise to increase the range and counterclockwise to decrease it.

5. Testing

   • Test the sensor by bringing a target object within the detection range. The output should change state when the target is detected.

6. Environmental Considerations

   • Ensure the sensor is used within the specified operating temperature range (-25掳C to +70掳C). Avoid exposure to environments that exceed the storage temperature range (-40掳C to +85掳C).

7. Maintenance

   • Regularly inspect the sensor for any physical damage or wear. Clean the sensing face with a soft, dry cloth if necessary.

8. Troubleshooting

   • If the sensor does not respond as expected, check the power supply, wiring connections, and output configuration. Refer to the user manual for detailed troubleshooting steps.

(For reference only)