Details

---

BUY BIP60015 https://www.utsource.net/itm/p/12606806.html

Parameter	Description	Value
Part Number	BIP60015	-
Type	Bipolar Junction Transistor (BJT)	-
Polarity	NPN	-
Collector-Emitter Voltage (Vceo)	Maximum voltage between collector and emitter with the base open	600 V
Emitter-Base Voltage (Vebo)	Maximum voltage between emitter and base	7 V
Collector-Base Voltage (Vcbo)	Maximum voltage between collector and base with the emitter open	600 V
Collector Current (Ic)	Continuous collector current	15 A
Power Dissipation (Ptot)	Total power dissipation at Tc = 25掳C	150 W
Storage Temperature (Tstg)	Operating temperature range for storage	-65掳C to 150掳C
Junction Temperature (Tj)	Maximum junction temperature	150掳C
Transition Frequency (ft)	Transition frequency	3 MHz
Current Gain (hFE)	DC current gain (at Ic = 1 A, Vce = 10 V)	10 to 100
Package	TO-247	-

Instructions for Use

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical damage.
   • Use appropriate heat sinks to manage thermal dissipation, especially when operating near the maximum power dissipation limit.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Ensure that the voltage and current ratings are not exceeded to prevent damage to the transistor.

3. Thermal Management:

   • The device should be mounted on a suitable heat sink to maintain the junction temperature within the specified limits.
   • Use thermal paste or thermal grease to improve heat transfer between the device and the heat sink.

4. Operating Conditions:

   • Operate the device within the specified temperature range to ensure reliable performance.
   • Avoid subjecting the device to rapid temperature changes to prevent thermal shock.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Ensure that the storage environment is free from corrosive gases and contaminants.

6. Testing:

   • Before installation, test the device using a multimeter or a dedicated transistor tester to verify its functionality.
   • Check for any short circuits or open circuits between the terminals.

7. Safety Precautions:

   • Always use appropriate personal protective equipment (PPE) when handling high-voltage components.
   • Follow all safety guidelines and regulations when working with electrical circuits.

(For reference only)