Details

---

BUY G8NB-2S-12VDC https://www.utsource.net/itm/p/12606807.html

Below is the parameter table and instructions for the G8NB-2S-12VDC relay.

Parameter Table

Parameter	Value
Type	SPDT (Single Pole Double Throw)
Coil Voltage	12V DC
Coil Current	30mA
Contact Form	1C (1 Common)
Contact Rating	10A at 250V AC
Insulation Resistance	100M惟 at 500V DC
Dielectric Strength	1500V AC for 1 minute
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Weight	10g
Dimensions	17.5mm x 12.2mm x 12.2mm

Instructions

1. Installation:

   • Ensure that the relay is installed in a clean, dry environment.
   • Mount the relay on a flat surface using the provided mounting holes or clips.
   • Avoid installing the relay near heat sources or in areas with high humidity.

2. Wiring:

   • Connect the coil terminals to the 12V DC power supply.
   • Connect the common (COM) terminal to the circuit you want to control.
   • Connect the normally open (NO) and normally closed (NC) terminals as required by your application.

3. Operation:

   • When the coil is energized, the common contact will switch from the normally closed (NC) position to the normally open (NO) position.
   • When the coil is de-energized, the common contact will return to the normally closed (NC) position.

4. Testing:

   • Use a multimeter to verify the continuity between the common and normally closed (NC) contacts when the coil is de-energized.
   • Energize the coil and verify the continuity between the common and normally open (NO) contacts.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth if necessary.
   • Do not use solvents or abrasive materials to clean the relay.

6. Safety:

   • Always disconnect the power supply before performing any maintenance or testing.
   • Ensure that the relay is rated for the voltage and current of your application.
   • Follow all local electrical codes and safety regulations.

By following these instructions, you can ensure the proper installation, operation, and maintenance of the G8NB-2S-12VDC relay.

(For reference only)