Details

---

BUY 2SB986-S https://www.utsource.net/itm/p/12606825.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	100	V
Collector-Base Voltage	VCBO	-	-	120	V
Emitter-Base Voltage	VEBO	-	-	5	V
Collector Current	IC	-	3	5	A
Base Current	IB	-	-	0.5	A
Power Dissipation	PT	-	-	100	W
Operating Temperature	Top	-40	-	150	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Transition Frequency	fT	-	100	-	MHz

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SB986-S with care to avoid mechanical damage.
   • Ensure that the mounting surface is clean and flat to ensure good thermal contact.
   • Use a heat sink if necessary to dissipate the heat generated during operation.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply voltage.
   • Connect the emitter (E) to ground or the load.
   • Connect the base (B) to the control circuit, ensuring that the base current does not exceed the maximum specified value.

3. Biasing:

   • Properly bias the transistor to ensure it operates in the desired region (cut-off, active, or saturation).
   • Use a suitable base resistor to limit the base current and prevent damage to the transistor.

4. Thermal Management:

   • Monitor the operating temperature to ensure it stays within the specified range.
   • Use a thermal compound between the transistor and the heat sink to improve heat transfer.

5. Storage:

   • Store the 2SB986-S in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive environments.

6. Testing:

   • Before installing the transistor, test it using a multimeter or a transistor tester to ensure it is functioning correctly.
   • Check for short circuits and open circuits between the pins.

7. Safety:

   • Always disconnect the power supply before making any connections or changes to the circuit.
   • Use appropriate safety equipment when working with high voltages and currents.

By following these instructions, you can ensure the reliable and safe operation of the 2SB986-S transistor.

(For reference only)