Details

---

BUY SLA-S-112DMJ-F-30 https://www.utsource.net/itm/p/12606832.html

Parameter	Value
Part Number	SLA-S-112DMJ-F-30
Type	Linear Actuator
Voltage	12V DC
Current	0.5A (no load)
Force	30N
Stroke Length	112mm
Speed	6mm/s (no load)
Operating Temperature	-20掳C to +70掳C
IP Rating	IP65
Connection	Molex Connector
Weight	250g
Dimensions	30mm x 30mm x 180mm

Instructions

1. Power Supply:

   • Ensure the power supply is 12V DC.
   • Connect the actuator to the power supply using the provided Molex connector.

2. Mounting:

   • Mount the actuator securely to prevent movement during operation.
   • Use the mounting holes provided for attachment.

3. Control:

   • The actuator can be controlled using a simple on/off switch or a more complex control system.
   • For precise control, use a PWM signal or a dedicated controller.

4. Operation:

   • When powered, the actuator will extend or retract based on the direction of the current.
   • The stroke length is 112mm, and the speed is 6mm/s under no load conditions.

5. Maintenance:

   • Regularly inspect the actuator for any signs of wear or damage.
   • Clean the actuator with a dry cloth to remove dust and debris.

6. Safety:

   • Do not exceed the maximum force of 30N to avoid damaging the actuator.
   • Avoid operating the actuator outside the specified temperature range to prevent malfunction.

7. Storage:

   • Store the actuator in a dry, cool place when not in use.
   • Keep the actuator away from direct sunlight and corrosive substances.

(For reference only)