Details

---

BUY UCS2904B https://www.utsource.net/itm/p/12606840.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	2.7		5.5	V	Operating supply voltage
Output Current	IO		100		mA	Maximum output current per channel
Operating Temperature	TOPR	-40		85	掳C	Operating temperature range
Storage Temperature	TSTG	-65		150	掳C	Storage temperature range
Quiescent Current	IQ		3		渭A	Supply current in shutdown mode
Propagation Delay Time	tpd		9		ns	Propagation delay time
Pulse Width Distortion	PWD		0.5		ns	Pulse width distortion

Instructions for UCS2904B:

1. Supply Voltage (VCC):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V. Voltages outside this range can damage the device.

2. Output Current (IO):

   • The device can source up to 100mA per channel. Do not exceed this limit to avoid overheating or damaging the component.

3. Operating and Storage Temperature:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device between -65掳C and 150掳C.

4. Quiescent Current (IQ):

   • When the device is in shutdown mode, it consumes approximately 3渭A. This is useful for low-power applications.

5. Propagation Delay Time (tpd):

   • The typical propagation delay is 9ns. Consider this parameter for timing-sensitive applications.

6. Pulse Width Distortion (PWD):

   • The pulse width distortion is typically 0.5ns, which is critical for maintaining signal integrity in high-speed circuits.

7. Handling Precautions:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage. Use proper ESD protection measures during handling and installation.

8. Mounting:

   • Follow standard surface mount technology (SMT) procedures for mounting. Ensure that soldering temperatures do not exceed the storage temperature limits.

9. Applications:

   • Suitable for use in LED drivers, motor control, and general-purpose switching applications requiring high efficiency and reliability.

(For reference only)