Details

---

BUY MK4096N-16 https://www.utsource.net/itm/p/12606871.html

Parameter	Description	Value	Unit
Device Type	Description of the device	SRAM	-
Part Number	Unique identifier for the component	MK4096N-16	-
Organization	Manufacturer or supplier	Manufacturer	-
Memory Size	Total memory capacity	4 Mbit	-
Data Width	Width of data bus	16 bits	-
Access Time	Time required to access memory	55 ns	ns
Supply Voltage (Vcc)	Operating voltage range	3.3 V 卤 10%	V
Operating Temperature	Range of temperatures for operation	-40 to +85	掳C
Storage Temperature	Range of temperatures for storage	-65 to +150	掳C
Package Type	Type of package	TSSOP	-
Pin Count	Number of pins	44	-
Standby Current	Current consumption in standby mode	20 渭A	渭A
Active Current	Current consumption during active operation	35 mA	mA
Write Cycle Time	Time required to complete a write cycle	55 ns	ns
Read Cycle Time	Time required to complete a read cycle	55 ns	ns
Slew Rate	Rate of change of current or voltage	1 V/ns	V/ns
Output Drive Strength	Maximum output drive strength	24 mA	mA

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 3.3 V 卤 10%.
   • Connect the ground (GND) pin to a stable ground reference.

2. Signal Connections:

   • Connect the address lines (A0-A19) to the appropriate address signals.
   • Connect the data lines (D0-D15) to the data bus.
   • Connect the control signals (CE, OE, WE) to the corresponding control lines in your system.

3. Operation Modes:

   • Read Operation:
     • Set the Chip Enable (CE) and Output Enable (OE) low.
     • Set the Write Enable (WE) high.
     • Apply the desired address to the address lines.
     • The data will be available on the data lines after the access time.
   • Write Operation:
     • Set the Chip Enable (CE) and Write Enable (WE) low.
     • Set the Output Enable (OE) high.
     • Apply the desired address to the address lines.
     • Apply the data to the data lines.
     • The data will be written to the specified address after the write cycle time.

4. Temperature Considerations:

   • Ensure the operating temperature is within the range of -40掳C to +85掳C.
   • Store the device in an environment with a temperature range of -65掳C to +150掳C.

5. Handling Precautions:

   • Handle the device with care to avoid damage to the pins.
   • Follow proper ESD (Electrostatic Discharge) precautions to prevent damage to the device.

6. Testing and Verification:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Use standard test patterns to ensure all functions are working correctly.

7. Storage and Handling:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Follow recommended handling procedures to avoid physical damage.

(For reference only)