Details

---

BUY NGD8201ANG https://www.utsource.net/itm/p/12606884.html

Parameter	Description	Value	Unit
Supply Voltage (VDD)	Operating supply voltage range	2.7 to 5.5	V
Input Voltage Range	Input voltage range for logic inputs	VSS to VDD	V
Output Voltage Swing	Output voltage swing	VSS to VDD - 0.1	V
Propagation Delay Time	Typical propagation delay time	6.5	ns
Power Consumption	Quiescent current at no load	1	渭A
Operating Temperature	Junction temperature range	-40 to +85	掳C
Storage Temperature	Storage temperature range	-65 to +150	掳C

Instructions for NGD8201ANG

1. Power Supply Connection:

   • Connect the VDD pin to the positive power supply and the VSS pin to ground. Ensure that the supply voltage is within the specified operating range of 2.7V to 5.5V.

2. Input Handling:

   • Apply input signals within the valid input voltage range, which is from VSS to VDD. Avoid exceeding these limits to prevent damage.

3. Output Load:

   • The output can swing from VSS to nearly VDD (VDD - 0.1V). Ensure that the connected load does not pull the output below VSS or above VDD - 0.1V.

4. Timing Considerations:

   • Account for a typical propagation delay of 6.5 nanoseconds in your timing calculations. This ensures proper synchronization in your circuit design.

5. Power Management:

   • The device consumes approximately 1渭A of quiescent current under no-load conditions. Design your power management system considering this low-power consumption.

6. Temperature Limits:

   • Operate the device within the junction temperature range of -40掳C to +85掳C. Store it within the storage temperature range of -65掳C to +150掳C to avoid thermal damage.

7. Handling Precautions:

   • Handle the NGD8201ANG with care to avoid electrostatic discharge (ESD) damage. Use appropriate ESD protection measures when handling and installing the component.

(For reference only)