Details

---

BUY TLP832 https://www.utsource.net/itm/p/12606896.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 20 mA	1.0	1.3	1.6	V
Reverse Breakdown Voltage	VBR	IR = 1 mA			5	V
Output Current	IO	VCE = 5 V	10	20	30	mA
Rise Time	tr	RL = 1 k惟, CL = 10 pF	10	20	30	ns
Fall Time	tf	RL = 1 k惟, CL = 10 pF	10	20	30	ns
Propagation Delay Time	tpd	RL = 1 k惟, CL = 10 pF	20	30	40	ns
Storage Temperature	TSTG		-40		110	掳C

Instructions for Using TLP832

1. Forward Voltage (V_F):

   • Ensure that the forward voltage across the device does not exceed 1.6V when the forward current (IF) is 20mA.
   • Use a current-limiting resistor to prevent excessive current.

2. Reverse Breakdown Voltage (V_BR):

   • The device should not be subjected to reverse voltages greater than 5V to avoid damage.

3. Output Current (I_O):

   • The output current should be within the range of 10 to 30mA when the collector-emitter voltage (V_CE) is 5V.
   • Ensure the load resistance is appropriate to maintain this current range.

4. Rise and Fall Time (t_r, t_f):

   • The rise and fall times are influenced by the load resistance (RL) and capacitance (CL).
   • For optimal performance, use a load resistance of 1 k惟 and a capacitance of 10 pF.

5. Propagation Delay Time (t_pd):

   • The propagation delay time is the time it takes for the output to respond to an input change.
   • It should be within 20 to 40 ns under typical conditions.

6. Storage Temperature (T_STG):

   • Store the device in an environment with temperatures ranging from -40掳C to 110掳C to ensure reliability and longevity.

7. Handling and Installation:

   • Handle the device with care to avoid static discharge.
   • Follow proper soldering techniques to prevent thermal shock and mechanical stress.

8. Testing:

   • Before integrating the TLP832 into a circuit, test it using a known good setup to verify its functionality.

9. Applications:

   • The TLP832 is suitable for optocouplers, signal isolation, and digital communication interfaces where electrical isolation is required.

(For reference only)